HEIDENHAIN iTNC 530 HSCI - Module 9343 Compile and Activate Magazine Rules

1588 HEIDENHAIN Technical Manual iTNC 530 HSCI
Module 9343 Compile and activate magazine rules
Module 9343 is used to compile and activate magazine rules (*.TCR),
independent of the entry TCHRULES = in OEM.SYS. If the entry exists in
OEM.SYS, the magazine rules are overwritten when Module 9343 is called. If
an error occurs during compilation, the PLC program is stopped. The magazine
rules must be activated during the first run of the PLC program or before the
first call of Modules 934x.
Call:
PS B/W/D/K/S<Path and file name of the magazine rules>
CM 9343
Error code:
Marker Value Meaning
M4203 0 Magazine rules have been compiled and activated
1 Error code in W1022
W1022 11 Invalid string programmed
20 Module was not called in a spawn or submit job
38 Error during compilation