HEIDENHAIN iTNC 530 HSCI - Powering up and Shutting down the Control

1260 HEIDENHAIN Technical Manual iTNC 530 HSCI
8.1.17 Powering up and shutting down the control
Powering up the
control
While the control is starting, a customer-specific company logo can be
displayed instead of the HEIDENHAIN logo. If a service pack is installed, then
a different logo may appear instead of the message window.
Requirements of the logo:
 The logo must be a bitmap file (*.BMP) with a color resolution of 16 or 24
bits. It is displayed in 16 bits.
 Maximum picture size:
• BF 250: 1024 x 768
• BF 260: 1280 x 1024
 The logo must be designed to remain recognizable even with a reduced
window:
While the control is powering up, the complete logo is displayed. If power
is interrupted, only a reduced window remains available:
• BF 250: 1020 x 681
• BF 260: 1142 x 848
Note
If the picture is larger than the window, it will be cropped symmetrically. If
the picture is smaller than the window, it will be displayed centered.