1338 HEIDENHAIN Technical Manual iTNC 530 HSCI
8.1.34 Software option 133—Remote Desktop Manager
Software option 133 enables you to display external computer units on the
TNC screen that are connected via Ethernet and to operate them over the
TNC. You can also start programs specifically under HeROS or display web
pages of an external server.
HEIDENHAIN offers you the IPC 6341 as a Windows computer unit. With the
IPC 6341 Windows computer you can start and operate Windows-based
applications directly from the TNC, see page 1931.
Configure the Remote Desktop Manager as follows, after you have enabled
software option 133:
Make the taskbar at the bottom of the screen visible by moving the mouse
pointer over it.
Press the green HEIDENHAIN button to open the JH menu.
Select the Remote Desktop Manager menu item.
With the Remote Desktop Manager you can create and configure connections
for individual external applications or computers (e.g Web or VNC). You can
also define for each connection whether it is to be established right away
when the control is booting, and on which control desktop it is to be displayed.
Five basic connection types are available for the configuration of individual
connections,
Menu item Function
Add Connection Configure a new connection
Delete Connection Delete a connection
Edit Connection Edit a connection
End Exit the Remote Desktop Manager
To Next Page
Loading...
