July 2013 10.3 Connecting the iTNC to the Network 1875
Screen
button /
soft key
Screen button /
soft key
Meaning
The following tabs are available in the Networks window:
Mount Shows whether a drive is connected (indicated by a check mark).
Auto Shows whether a drive is connected automatically if a network
connection exists (indicated by a check mark).
For networks that are to be connected automatically, the TNC
attempts to do so for up to a minute after booting. In this way,
the automount succeeds even when a device in the network (e.g.
a switch in the machine) does not start up until the machine
switches on.
Type Type of network share:
CIFS/SMB: Windows share or Samba server share
NFS: Unix share
Drive The device name entered here is displayed at the iTNC in the
program management for the mounted network, e.g. WORLD:
ID Information for distinguishing between several identical network
drives that are to be accessed with different user names, for
example.
Server Network name or IP address of the computer or server to which
the iTNC logs on.
Share Share name of the directory to which the iTNC logs on.
User User name with which the iTNC logs on.
Password Password with which the iTNC logs on.
Ask for password? Shows whether the password is requested when the drive is
connected (indicated by check mark).
To Next Page
Loading...
