HEIDENHAIN iTNC 530 HSCI - Page 1876

1876 HEIDENHAIN Technical Manual iTNC 530 HSCI
Options Shows special network settings, for example:
Options that concern the file system type nfs: Options are
entered without spaces, separated only by commas. Pay
attention to capitalization.
Options:
rsize: Packet size in bytes for data reception. Input range 512 to
8192
wsize: Packet size in bytes for data transmission. Input range 512
to 8192
timeo: Time in tenths of a second after which the iTNC repeats
a Remote Procedure Call not answered by the server. Input range
0 to 100000. If there is no entry, the standard value 7 is used. Use
higher values only if the iTNC must communicate with the server
over more than one router. Your network specialist determines
this value.
soft: The Remote Procedure Call is repeated until the NFS server
answers. If soft is entered, it is not repeated.
Options that concern the file system type smb: Options are
entered without spaces, separated only by commas. Pay
attention to capitalization.
Options:
ip=: IP address of the Windows PC to which the iTNC is to be
connected
username: User name with which the iTNC should log in
workgroup: Workgroup under which the iTNC should log in
password: Password with which the iTNC should log in (up to 80
characters)
Screen
button /
soft key
Screen button /
soft key
Meaning