HEIDENHAIN iTNC 530 HSCI - Page 382

382 HEIDENHAIN Technical Manual iTNC 530 HSCI
Permissible
parameters for
SKMENU
Keywords in the
soft-key menus
Entry in *.SPJ In connection with Meaning
VROOT SKMENU The menu for the right vertical soft-key row is defined
in the header of the main menu.
HROOT SKMENU The menu for the horizontal soft-key row is defined in
the header of the main menu.
LROOT SKMENU The menu for the left vertical soft-key row is defined
in the header of the main menu.
HRMENU SKMENU Optional: This soft-key menu is a handwheel menu
HRROOT SKMENU Optional: This soft-key menu is the start menu of the
handwheel
IHROOT SKMENU Optional: This soft-key menu is the horizontal start
menu of an ITC terminal.
IVROOT SKMENU Optional: This soft-key menu is the vertical start
menu of an ITC terminal.
EMODE SKMENU The menu for the programming operating modes is
defined in the header of the main menu.
MMODE SKMENU The menu for the machine operating modes is
defined in the header of the main menu.
OMODE SKMENU Optional: This (Python) soft-key menu is only visible in
the OEM operating mode (third screen).
IDENT:<id> SKMENU Optional: Identifier for access from Python
processes.
Entry in *.SPJ Meaning
Keywords for menu definition:
ROWDEF Specifies the position of a soft-key menu that does
not span the entire soft-key row.
SKPREVDEF Defines the key that triggers the page left/up
function.
SKNEXTDEF Defines the key that triggers the page right/down
function.