HEIDENHAIN iTNC 530 HSCI - Page 384

384 HEIDENHAIN Technical Manual iTNC 530 HSCI
Pin layout Pin layout for the various extension cables, adapter cables, connecting cables,
and the handwheel:
Extension cable,
ID 281429-xx
Adapter cable,
ID 296466-xx
For connecting cable ID,
see "Introduction"
chapter.
HR 4xx
HR 5xx
D-sub
connector
(male) 9-pin
D-sub
connector
(female)
9-pin
D-sub
connector
(male) 9-pin
Mounted
coupling
(female)
(5+7)-pin
Cnnctr. (male)
(5+7)-pin
Cnnctr.
(female)
(5+7)-pin
Cnnctr. (male)
(5+7)-pin
Hsg. Shield Housing Hsg. Shield Housing Hsg. Shield Housing Hsg. Shield
2 White 2 2 White E E White E E
4 Brown 4 4 Brown D D Brown D D
6 Yellow 6 6 Yellow B B Yellow B B
7 Gray 7 7 Gray A A Gray A A
8 Green 8 8 Green C C Green C C
WH/BK 6 6 BK 6 6
YL/BK 7 7 RD/BL 7 7
WH/RD 5 5 Red 5 5
WH/BL 4 4 Blue 4 4
WH/GN 2 2 WH/GN 2 2
WH/YL 3 3 BN/GN 3 3
WH/GN 1 1 GY/PK 1 1
WH/BN X1/3 Contacts 1 + 2 (supply)
WH/YL X1/1 Contact 2 (left) permissive button
WH/GN X1/2 Contact 1 (right) Permissive button
WH/BL X2/1 Contact 1/Terminal 1 (EMERGENCY STOP)
WH/RD X2/2 Contact 1/Terminal 2 (EMERGENCY STOP)
YL/BK X2/4 Contact 2/Terminal 1 (EMERGENCY STOP)
WH/BK X2/3 Contact 2
Note
The interfaces comply with the requirements of EN 61800-5-1 for
"protective extra-low voltage (PELV)."
Danger
Only units that comply with the requirements of EN 61800-5-1 for
"protective extra-low voltage (PELV)" may be connected.