July 2013 8.1 Display and operation 1303
MC internal signals and status
"Commissioning
Current
Controller" mode
The signal is active if the control is in the
operating mode for adjusting the current
controller.
Gray: No information about the
signal available
Green: Operating mode for
adjusting the current controller is
active
Red: Operating mode for adjusting
the current controller is not active
Power
interruption
acknowledged
The signal is active if the Power
interrupted message has been
acknowledged with the CE key.
Gray: No information about the
signal available
Green: Power interruption was
acknowledged
Red: Power interruption was not
acknowledged
Signal Meaning Colors
To Next Page
Loading...
