July 2013 8.1 Display and operation 1333
To call the configuration of the window manager, press the ADVANCED
SETUP soft key and then the CONFIGURE WINDOW-MANAGER soft key.
If you press the LOAD MINIMUM CONFIG soft key and confirm the
following confirmation prompt, the current configuration of the window
manager will be overwritten with the SIMPLE configuration.
If you press the LOAD MAXIMUM CONFIG soft key and confirm the
following confirmation prompt, the current configuration of the window
manager will be overwritten with the FULL configuration.
If you do not want to load any configuration, press the LOAD CUSTOMIZED
CONFIG soft key. This starts the XFCE configuration dialog in which you can
edit the current configuration.
To Next Page
Loading...
