July 2013 8.4 Keystroke simulation 1399
Call:
PS B/W/D/K <Mode>
0 = Simulate the soft key using the soft-key designator
PS B/W/D/K/S<Soft-key designator>
Bit 0:
0 = Soft-key is only simulated if it is in the main row
1 = Soft key is simulated regardless of whether it is in the
main or subordinate row
CM 9188
Error code:
SK_NC_Program_run_GLOBAL_SETTINGS_SET_
INACTIVE
SK_NC_Program_run_GLOBAL_SETTINGS_UNDO
SK_NC_Program_run_INTERNAL_STOP
SK_NC_Program_run_RESTORE_POSITION
SK_NC_Program_run_MANUAL_TRAVERSE
Marker Value Meaning
M4203 0 No error
1 See error code
W1022 2 Invalid value for mode
11 String as a soft-key designator is invalid
20 Call was not in a submit or spawn job
45 Internal operating system error
61 Soft key is neither available in the main soft key row
nor in the following soft-key rows
62 Programmed soft-key name does not exist
Soft key Soft-key designator
To Next Page
Loading...
