July 2013 9.4 System Files 1707
SPLCSOFTVERS = Version identifier of the SPLC program. The entry can be displayed by pressing
the MOD key and can be requested via LSV2.
SOFTKEYPRESS = Display and behavior of the CHECK and RADIO types of soft keys. If
SOFTKEYPRESS = ON is entered, the soft-key graphics and the states of the PLC
markers already change when the soft key is pressed, see page 1376.
Input example: SOFTKEYPRESS = ON
TABCMA = Path for compensation value tables for axis error compensation (see
"Nonlinear axis error compensation" on page 652).
Input example: TABCMA = PLC:\AXIS_COR\CORRECT.CMA
TCHRULES = Path for the *.TCR definition file containing magazine rules for tool magazines.
Input example: TCHRULES = PLC:\RULES.TCR
TNCOPT.LOCK-
SOFTKEYVISIBLE =
After pressing the MOD key, the TNCOPT ON/OFF soft key is displayed in order
to enable commissioning on the control via TNCopt, see page 1023.
Input example: TNCOPT.LOCKSOFTKEYVISIBLE = YES
TTYP = Path and file name for list of the tool types.
To Next Page
Loading...
