176 HEIDENHAIN Technical Manual iTNC 530 HSCI
In these two cases, SELinux must be deactivated temporarily if Python scripts
or executable programs are to be transferred to the control via the file
manager, TNCremo or TNCbackup. Afterwards the file system must be
relabeled (Relabel Files) and SELinux must be activated again.
SELinux configuration:
Make the taskbar at the bottom of the screen visible by moving the mouse
pointer over it.
Press the green HEIDENHAIN button to open the JH menu.
Select the Settings menu item.
Select the SELinux menu item.
Menu item Function
Password Protection
Set Password Enter a password for the SELinux
configuration.
HEIDENHAIN recommends protecting the
settings for SELinux with a password.
Please note that the password needs to be
entered again before it can be changed or
deleted. If the password is lost, the storage
medium must be replaced before access to
the settings is permitted again.
Delete password Delete password for the SELinux
configuration.
Security Policy NOT active
(System is not protected)
Deactivate SELinux
Don’t warn if
SELinux is not
active
Do not display the message anymore.
To Next Page
Loading...
