July 2013 11.2 IPC 6341—Industrial PC with Windows 7 1937
With the default settings, Windows 7 is now displayed on the third desktop
and can be operated from there. You can switch to the third desktop via the
taskbar or the DIADUR key on the keyboard unit.
The left DIADUR key opens the JH menu (operating system settings) of
HEROS 5. Within a remote-desktop application, this key functions as a
Windows key.
The right key switches to a remote-desktop application if the "Remote
Desktop Manager" software option is enabled. If you happen to be in a
remote desktop, this key switches to the next remote desktop or back to
the NC application.
In a remote-desktop application, the screen switchover key has locally the
same effect as an F12 key, but you have to use the right DIADUR key to
switch back.
Remember to close Windows 7 on the IPC before shutting down the control.
Failure to do this can lead to loss of data or damage to the Windows system
during switch-off with the main switch of the machine.
To Next Page
Loading...
