July 2013 3.30 HSCI adapter for PLB 6001 (FS) OEM-specific machine operating panel 345
X6: PLC inputs Pin layout of PLB 6001 without FS:
Pin layout of PLB 6001 FS:
Connecting
terminals
Assignment
1I0
2I1
3I2
4I3
5I4
6I5
7I6
8I7
9 Reserved (do not use)
10 Reserved (do not use)
Connecting
terminals
Assignment
1I0.A
2I1.A
3I2.A
4I3.A
5I0.B
6I1.B
7I2.B
8I3.B
9 Power supply for channel A (–TEST.A)
10 Power supply for channel B (–TEST.B)
Please note that the PLB 6001 is supplied with +24 V NC.
For the entire HSCI system, the +24 V NC power supply voltage is required
to be safely separated voltage. It must also be safely separated from the
+24 V PLC!
To Next Page
Loading...
