HEIDENHAIN iTNC 530 HSCI - Page 828

828 HEIDENHAIN Technical Manual iTNC 530 HSCI
MP1230.x Max. permissible axis-specific jerk at corners for single
filter
Input: 0.1 to 1000.0 [m/s
3
]
MP1231.x Max. permissible axis-specific jerk at corners for double
filter
Input: 0.1 to 1000.0 [m/s
3
]
MP1232.x Max. permissible axis-specific jerk at corners for HSC-filter
Input: 0.1 to 1000.0 [m/s
3
]
MP1233.x Max. permissible axis-specific jerk at corners for advanced
HSC filter
Input: 0.1 to 1000.0 [m/s
3
]
MP1240.x Max. permissible axis-specific jerk at curvature transitions
for single filter
Input: 0.1 to 1000.0 [m/s
3
]
MP1241.x Max. permissible axis-specific jerk at curvature transitions
for double filter
Input: 0.1 to 1000.0 [m/s
3
]
MP1242.x Max. permissible axis-specific jerk at curvature transitions
for HSC filter
Input: 0.1 to 1000.0 [m/s
3
]
MP1243.x Max. permissible axis-specific jerk at curvature transitions
for advanced HSC filter
Input: 0.1 to 1000.0 [m/s
3
]
MP1250.x Max. permissible axis-specific jerk at curvature transitions
for advanced HSC filter
Input: 0.1 to 1000.0 [m/s
3
]