Command reference
R&S
®
ZNA
1278User Manual 1178.6462.02 ─ 29
MMEMory:FAVorite<FavId> <RecallSetFile>
Manages the list of favorite recall sets
Suffix:
<FavId>
.
Position in the favorites list
Setting parameters:
<RecallSetFile> File path, either absolute or relative to the current directory (see
MMEMory:CDIRectory). The empty string represents an empty
position in the favorites list.
Note that when a non-empty favorite is set, the target recall set
must exist.
Example:
:MMEMory:CDIRectory DEFault
:MMEM:FAV1 'RecallSets\My_RecallSet1.znxml'
Sets My_RecallSet1.znxml at position 1 of the favorites list.
MMEM:FAV1?
Returns 'C:\Users\Public\Documents\Rohde-Schwarz\
ZNA\RecallSets\My_RecallSet1.znxml'
MMEM:FAV1 'RecallSets\My_RecallSet2.znxml'
Sets My_RecallSet2.znxml as favorite 1, overwriting the pre-
vious favorite 1
MMEM:FAV1 ''
Clears position 1 of the favorites list
MMEM:FAV1?
Returns ''
Manual operation:
See "Import" on page 777
MMEMory:LOAD:CABLe <InputDir>
Loads Distance to Fault (DtF) cable type files (*.rsc) from the specified input direc-
tory.
Cable types are loaded "by name", overwriting user-defined cable types of the same
name. Predefined cable types of the same name will not be overwritten.
Setting parameters:
<InputDir> Input Directory
Example:
MMEMory:STORe:CABLe 'C:\dtf-cables'
Saves all predefined and user-defined Distance to Fault (DtF)
cable types to the directory C:\dtf-cables.
Edit *.rsc files for user defined cable types, copy *.rsc files,
rename and edit them. Afterwards execute
MMEMory:LOAD:CABLe 'C:\dtf-cables'
to update existing and create new user-defined cable types.
Usage: Setting only
Options: R&S ZNA-K2
Manual operation: See "Add / Delete" on page 836
SCPI command reference
To Next Page
Loading...
