Rohde & Schwarz R&S ZNA Series

To Next Page

To Previous Page

Command reference

R&S

ZNA

1279User Manual 1178.6462.02 ─ 29

MMEMory:LOAD:CKIT <CalKitFile>

Loads cal kit data from the specified cal kit file.

Setting parameters:

<CalKitFile> String parameter to specify name and directory of the loaded cal

kit file. If no path is specified the analyzer searches the current

directory, to be queried with MMEMory:CDIRectory

Example:

MMEM:LOAD:CKIT 'C:\Users\Public\Documents

\Rohde-Schwarz\ZNA\Calibration\Kits\New_kit.calkit'

Load the previously created cal kit file New_kit.calkit from

the default cal kit directory.

... :MMEM:STOR:CKIT 'New_kit', 'C:

\Users\Public\Documents

\Rohde-Schwarz\ZNA\Calibration\Kits\New_kit.calkit'

Store the data for the user-defined cal kit Newkit and overwrite

the cal kit file New_kit.calkit.

Usage: Setting only

Manual operation: See "Import Cal Kit..." on page 589

MMEMory:LOAD:CKIT:SDATa <ConnectorType>, <CalKitName>, <StandardType>,

<StandardLabel>, <TouchstoneFile>[, <FirstPort>[, <SecondPort>]]

Loads cal kit data for a calibration standard from a specified Touchstone file. A restric-

tion on the port assignment may be defined in addition.

Use the newer command MMEMory:LOAD:CKIT:SDATa:WLABel to be able to distin-

guish cal kits by label.

Setting parameters:

<ConnectorType> String parameter containing the name of the connector type.

<CalKitName> String parameter containing the name of a calibration kit availa-

ble on the analyzer.

Standard types; for a description refer to table Standard types

and their parameters.

<StandardLabel> String parameter addressing a particular calibration standard by

its label. An empty string means that no label is defined.

SCPI command reference

Rohde & Schwarz R&S ZNA Series - Page 1279