Rohde & Schwarz R&S ZNA Series - Page 1616

Command reference
R&S
®
ZNA
1616User Manual 1178.6462.02 ─ 29
Note that unregistering a device does not automatically delete its command configura-
tion (defined using [SENSe<Ch>:]GDEVice:SELect).
Example: See SYSTem:COMMunicate:RDEVice:GDEVice<Gdev>:
DEFine on page 1615.
Usage: Event
Manual operation: See "Configured Devices" on page 923
SYSTem:COMMunicate:RDEVice:GDEVice<Gdev>:DELete
Deletes (unregisters) generic external device no. <Gdev>.
Use SYSTem:COMMunicate:RDEVice:GDEVice:DELete:ALL to unregister all
devices.
Note that unregistering a device does not automatically delete its command configura-
tion (defined using [SENSe<Ch>:]GDEVice:SELect).
Suffix:
<Gdev>
.
Generic device number.
Example: See SYSTem:COMMunicate:RDEVice:GDEVice<Gdev>:
DEFine on page 1615.
Usage: Event
Manual operation: See "Configured Devices" on page 923
SYSTem:COMMunicate:RDEVice:GENerator<Gen>:CATalog?
Queries the numbers of all configured external generators. The response is a string
containing a comma-separated list of generator numbers.
Suffix:
<Gen>
.
Number of the configured generator. This suffix is ignored; the
command affects all generators.
Example:
SYST:COMM:RDEV:GEN1:DEF 'Ext. Gen. 1', 'SME02',
'gpib0', '21'
SYST:COMM:RDEV:GEN2:DEF 'Ext. Gen. 2', 'SME02',
'gpib0', '22'
Configure two R&S SME02 generators as external generators
no. 1 and 2, assigning different names and GPIB addresses.
SYST:COMM:RDEV:GEN1:CAT?
Query the generator numbers. The response is '1, 2'.
SYST:COMM:RDEV:GEN1:COUN?
Query the number of configured generators. The response is 2.
Usage: Query only
Manual operation: See "Configured Devices" on page 898
SCPI command reference