Rohde & Schwarz R&S ZNA Series - Page 1631

Command reference
R&S
®
ZNA
1631User Manual 1178.6462.02 ─ 29
SYSTem:TSLock..........................................................................................................1647
SYSTem:TTLout<Pt>:STATus[:STATe]............................................................................1648
SYSTem:USER:DISPlay:TITLe......................................................................................1648
SYSTem:USER:KEY.................................................................................................... 1649
SYSTem:VERSion?......................................................................................................1649
SYSTem:AGC:GLOBal:METHod <Global AGC Method>
Allows you to select between two AGC algorithms.
Setting parameters:
<Global AGC
Method>
POINt | MEMory
POINt
Point AGC
MEMory
Memory AGC
Manual operation: See "Global AGC (R&S ZNB only!)" on page 870
SYSTem:CORRection:JOINcal <FirstCal>, <LocationFirstCal>, <SecondCal>,
<LocationSecondCal>[, <OutputCal>[, <LocationOutputCal>]]
Command for joining calibrations.
●
The query returns whether if the two calibrations <FirstCal> (from <LocationFirst-
Cal>) and <SecondCal> (from <LocationSecondCal>) are joinable.
●
The set command tries to join the two calibrations.
If successful, it stores the resulting calibration as <OutputCal> in <LocationOutput-
Cal>.
Parameters:
<FirstCal> String parameter with the channel name (for <LocationFirst-
Cal>=CHANnel) or the calibration file name (for <LocationFirst-
Cal>=POOL) of the first calibration.
<LocationFirstCal> CHANnel | POOL
<SecondCal> String parameter with the channel name (for <LocationSecond-
Cal>=CHANnel) or the calibration file name (for <LocationSe-
condCal>=POOL) of the first calibration.
<LocationSecondCal>CHANnel | POOL
Setting parameters:
<OutputCal> String parameter with the channel name (for <LocationOutput-
Cal>=CHANnel) or the calibration file name (for <LocationOut-
putCal>=POOL) of the resulting calibration.
Note: If (<OutputCal>,<LocationOutputCal>) matches one of the
input calibrations, this input calibration is replaced.
<LocationOutputCal> CHANnel | POOL
Return values:
<Joinable>
SCPI command reference