GUI reference
R&S
®
ZNA
861User Manual 1178.6462.02 ─ 29
Sounds
Switches the sounds generated by the analyzer GUI on or off. Sounds are generated
for certain GUI events, when the analyzer generates a notice, status or warning mes-
sage (alarm sounds) or during calibration.
Limit fail beeps for limit tests, ripple tests, and circle tests is not affected by this setting.
If enabled, those beeps are generated even if "Sounds" is unchecked.
Note: The R&S ZNA does not have a built-in audio device and loudspeaker. To hear
sounds, connect a USB audio device to the instrument or operate it via remote desk-
top.
Remote command:
SYSTem:SOUNd:ALARm[:STATe]
SYSTem:SOUNd:STATus[:STATe]
Transparent Info Fields
This checkbox enables or disables transparent info fields for markers and trace statis-
tics.
Transparent info fields do not hide an underlying trace.
Remote command:
n.a.
Setup softtool
To Next Page
Loading...
