HEIDENHAIN iTNC 530 HSCI - Page 128

128 HEIDENHAIN Technical Manual iTNC 530 HSCI
CC 6108
All position and speed encoder inputs 1 V
PP
or EnDat
 HSCI interface
 Max. 8 digital control loops
 8 position and 8 speed encoder inputs with 1 V
PP
or
EnDat 2.2 for axes and spindle
(EnDat 2.2 is backward-compatible to EnDat 2.1)
 8 PWM outputs
 Power supply via UV(R), UE or UR power supply unit
CC 6110
All position and speed encoder inputs 1 V
PP
or EnDat
 HSCI interface
 Max. 10 digital control loops
 10 position and 10 speed encoder inputs with 1 V
PP
or
EnDat 2.2 for axes and spindle
(EnDat 2.2 is backward-compatible to EnDat 2.1)
 10 PWM outputs
 Power supply via UV(R), UE or UR power supply unit
UEC 11x
Controller unit with integrated inverter and PLC, for
machines with low power demands
 HSCI interface
 Controller unit with position, speed and current
controller
 UEC 111: Up to 4 digital control loops, connection for
3 axes and spindle
 UEC 112: Up to 5 digital control loops, connection for
4 axes and spindle
 Integrated braking resistor
 38 PLC inputs, 23 PLC outputs (expandable via PL 61xx)
 Interfaces to the speed encoders
 Interfaces to the position encoders
 Interfaces for one TS and TT touch probe each
 +24 V NC power supply with 2.5 A for MC and other
control components
Specifications iTNC 530 HSCI