HEIDENHAIN iTNC 530 HSCI - Page 1866

1866 HEIDENHAIN Technical Manual iTNC 530 HSCI
 Select the Interfaces tab in the configuration menu of the interface:
Tab Option Meaning
Interfaces List of the active Ethernet interfaces with information as to whether the interface is
active, the name, the connector and the IP configuration
 Activate button:
Activate the selected interface (the letter X appears in the Active column)
 Deactivate button:
Deactivate the selected interface (a dash (–) appears in the Active column)
 Configuration button:
Open the Configuration menu
IP forwarding This function must be inactive by default.
Only activate this function if external access to the second,
optional Ethernet interface of the control (available on the
MC 62xx) via the TNC is necessary for diagnostic purposes.