July 2013 10.3 Connecting the iTNC to the Network 1867
Press the Configuration button below the interface list to open the
Configuration menu:
Option Meaning
Status Interface active:
Status of the selected Ethernet interface.
Name:
Name of the interface you are currently configuring.
Plug connection:
Number of the plug connection of this interface on the logic unit of the
control.
Profile Here you can create or select a profile in which all settings shown in this
window are stored. HEIDENHAIN provides two standard profiles:
LAN-DHCP:
Settings for the standard TNC Ethernet interface, should work in a
standard company network.
MachineNet:
Settings for the second, optional Ethernet interface; for configuration of
the machine network (available on the MC 62xx).
Press the corresponding buttons to save, load and delete profiles.
IP address Automatically procure IP address:
The control is to procure the IP address automatically from the DHCP
server.
Set the IP address manually:
Manually define the IP address and subnet mask. Enter as four decimal
numbers separated by points (dotted-decimal notation, for example:
160.1.180.20 and 255.255.0.0). Your network specialist determines
both addresses of the iTNC.
To Next Page
Loading...
