July 2013 4.4 List of machine parameters 581
MP7684 Bit 9 – Accelerated 5-axis machining with M128 with many
rotary axis motions that are less than 2° per positioning
block (not with handwheel superimpositioning with M118)
0: Inactive
1: Active
Bit 10 - Modification of the calculation of the contouring
feed rate at the beginning of a contour element
0: Active
1: Inactive
829
MP7690 Evaluation of the electronic ID labels
Input: %xxx
Bit 0 – HEIDENHAIN power modules
0: Active
1: Inactive
Bit 1 – HEIDENHAIN synchronous motors
0: Active
1: Inactive
Bit 2 – HEIDENHAIN power supply units
0: Active
1: Inactive
1319
MP Function and input Software
version and
behavior
Page
To Next Page
Loading...
