HEIDENHAIN iTNC 530 HSCI - Page 707

July 2013 6.5 Tilting and swivel axes 707
Step 8
 Position C to 0
 Position B to –90
 Probe surface Z
 ΔZ = determined value
 Position B to +90
 Probe surface Z
 Z = {[–0.5 * (ΔZ + determined value) – probe length + ball radius] – Z1} / cos 45°
(Z1 see step 7)
 Entry for the kinematics if the results differ for
• <Line no. [3] Column COORD> and Z, then COORD = 0.5 * (<Line no. [3] Column COORD> + Z)