Rohde & Schwarz R&S ZNA Series - Page 1127

Command reference
R&S
®
ZNA
1127User Manual 1178.6462.02 ─ 29
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Boolean> ON | OFF – info field on or off.
*RST: OFF
Options: R&S ZNA-K1
Manual operation: See "Power Ratio" on page 458
CALCulate<Chn>:STATistics:PRATio:RESult?
Returns the power ratio staticstics (three comma-separated numeric values) of a spec-
trum analysis trace:
●
Power density in reference range
(see CALCulate<Chn>:STATistics:RDOMain:USER)
●
Power density in evaluation range
(see CALCulate<Chn>:STATistics:DOMain:USER)
●
Power ratio (trace value vs. reference range)
Suffix:
<Chn>
.
Channel number used to identify the active trace
Usage: Query only
Options: R&S ZNA-K1
Manual operation: See "Power Ratio" on page 458
CALCulate<Chn>:STATistics:RDOMain:USER <EvalRange>
Selects one of the 10 channel-specific user defined ranges as the reference range for
spectrum power ratio calculations.
The selected range can then be configured with the CALCulate<Chn>:
STATistics:RDOMain:USER:STARt, CALCulate<Chn>:STATistics:RDOMain:
USER:STOP, and CALCulate<Chn>:STATistics:RDOMain:USER:SHOW com-
mands.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<EvalRange>
Options: R&S ZNA-K1
Manual operation: See "Ref. Range" on page 460
SCPI command reference