Ruijie RG-WLAN Series - Dot11 Radio Commands; Dot11 Wlan; Broadcast-Ssid

Command Reference Dot11 Radio Commands
Dot11 Radio Commands
dot11 wlan
Use this command to create a WLAN and enters WLAN configuration mode.
dot11 wlan wlan-id
no dot11 wlan wlan-id
Parameter
Description
Parameter Description
no Deletes the WLAN.
wlan-id
Specifies a WLAN ID.
Defaults
N/A
Command
mode
Global configuration mode
Usage Guide
After a WLAN is created, the command line interface enters WLAN configuration mode.
Configuration
Examples
# Create a WLAN called WLAN 1 and enter WLAN configuration mode.
Ruijie(config)# dot11 wlan 1
Ruijie(dot11-wlan-config)#
# Delete the WLAN.
Ruijie(config)# no dot11 wlan 1
Related
Commands
Command Description
wlan-id
Sets a WLAN ID for the Dot11radio interface.
Platform
Description
N/A
broadcast-ssid
Use this command to display the service set identifier (SSID). Use the no form of this command to
hide the SSID.
broadcast-ssid
no broadcast-ssid