Ruijie RG-WLAN Series Rgos Command Reference

Command Reference SSH Commands
ip ssh version {1 | 2}
no ip ssh version
Parameter Description
1
Supports the SSH1 client connection request.
Parameter
Description
2
Supports the SSH2 client connection request.
Defaults
SSH1 and SSH2 are compatible by default. When a version is set, only the connection sent by the
SSH client of this version is accepted. You can use the no ip ssh version command to restore to the
default setting.
Command
Mode
Global configuration mode
Usage Guide
Use this command to configure the SSH connection protocol version supported by the SSH server.
By default, the SSH server supports SSH1 and SSH2, and the clients of these versions can connect
to the SSH server. If Version 1 or 2 is set, only the SSH client of this version can connect to the SSH
server. Use the show ip ssh command to display the current status of SSH server.
Configuration
Examples
The following example sets the version of the SSH server to Version 2.
Ruijie# configure terminal
Ruijie(config)# ip ssh version 2
Command Description Related
Commands
show ip ssh
Displays the current status of the SSH server.
Platform
Description
N/A
disconnect ssh
Use this command to disconnect the established SSH connection.
disconnect ssh [vty] session-id
Parameter Description Parameter
Description
session-id
ID of the established SSH connection session
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
You can disconnect an SSH connection by entering the ID of the SSH connection or the specified
VTY connection ID. Only connections of the SSH type can be disconnected.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English