Command Reference 802.1X Commands
dot1x timeout server-timeout
Set the authentication timeout between the
device and authentication server.
dot1x timeout supp-timeout
Set the authentication timeout between the
device and the supplicant.
dot1x timeout tx-period
Set the retransmission period.
Platform
Description
N/A
show dot1x summary
Use this command to display the 802.1X authentication summary.
show dot1x summary
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example shows the summary of 802.1x authentication:
Ruijie# show dot1x summary
ID User MAC Interface VLAN Auth-State
Backend-State Port-Status User-Type Time
-------- ---------- -------------- --------- ---- ---------------
------------- ----------- --------- ------------------
2 ts-user 0023.aeaa.4286 Fa0/5 1 Authenticated
Idle Authed static 0days 0h 8m 8s
Ruijie#
Related
Commands
Command Description
dot1x auth-mode
Sets the 802.1x authentication mode.
dot1x max-req
Sets the maximum number of authentication
request retransmissions.
dot1x port-control auto
Sets the port to participate in authentication.
To Next Page
Loading...
