Command Reference NFPP Commands
Platform
Description
N/A
icmp-guard trusted-host
Use this command to set the trusted hosts free form monitoring.
icmp-guard trusted-host ip mask
no icmp-guard trusted-host { all | ip mask }
Parameter
Description
Parameter Description
ip
Set the IP address.
mask
Set the IP mask.
all
Delete the configurations of all trusted hosts.
Defaults
N/A.
Command
Mode
NFPP configuration mode.
Usage Guide
The administrator can use this command to set the trusted host free from monitoring. The ICMP
packets are allowed to send to the trusted host CPU without any rate-limit and warning configuration.
Configure the mask to set all hosts in one network segment free from monitoring.
UP to 500 trusted hosts are supported.
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# icmp-guard trusted-host 1.1.1.0 255.255.255.0
Related
Commands
Command Description
show nfpp icmp-guard trusted-host
Show the configurations.
Platform
Description
N/A
ip-guard attack-threshold
Use this command to set the global attack threshold. When the packet rate exceeds the attack
threshold, the attack occurs.
ip-guard attack-threshold { per-src-ip | per-port } pps
Parameter
Parameter Description