Ruijie RG-WLAN Series

Command Reference WIDS Commands
reset attack-list all
Use this command to clear the entries of all attack lists.
reset attack-list all
Parameter
Description
Parameter Description
all Specifies that the entries of all attack lists are cleared.
Defaults
N/A
Command
mode
WIDS configuration mode
Usage Guide
N/A
Configuration
Examples
#Clear the entries of all attack lists.
Ruijie(config)# wids
Ruijie(config-wids)# reset attack-list all
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
reset detected
Use this command to reset the device list detected in a WLAN.
reset detected { all | rogue { ap | client } | mac-address H.H.H }
Parameter
Description
Parameter Description
all
The parameter indicates that you reset all devices detected in a
WLAN.
rogue ap
The parameter indicates that you reset the detected Rogue AP.
rogue client
The parameter indicates that you reset the detected Rogue Client.
mac-address H.H.H
The parameter indicates that you reset the device with the source
MAC address H.H.H.
Defaults
N/A