Command Reference NFPP Commands
There are 6 logs in buffer.
The following example shows the NFPP log buffer area:
Ruijie#show nfpp log buffer
Protocol VLAN Interface IP address MAC address Reason Timestamp
------- ---- -------- --------- ----------- ------ ---------
ARP 1 Gi0/1 1.1.1.1 - DoS 2009-05-30
16:23:10
ARP 1 Gi0/1 1.1.1.1 - ISOLATED 2009-05-30
16:23:10
ARP 1 Gi0/1 1.1.1.2 - DoS 2009-05-30
16:23:15
ARP 1 Gi0/1 1.1.1.2 - ISOLATE_FAILED 2009-05-30
16:23:15
ARP 1 Gi0/1 - 0000.0000.0001 SCAN 2009-05-30
16:30:10
ARP - Gi0/2 - - PORT_ATTACKED 2009-05-30
16:30:10
Field Description
Protocol ARP, IP, ICMP, DHCP,DHCPv6, NS-NA, RS, RA-REDIRECT
Reason 1. DoS
2. ISOLATED
3. ISOLATE_FAILE
4. SCAN
5. PORT_ATTACKED
Related
Commands
Command Description
clear nfpp log
Clear the NFPP log buffer area.
Platform
Description
N/A
show nfpp nd-guard summary
Use this command to show the configurations.
show nfpp nd-guard summary
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A