Ruijie RG-WLAN Series

Command Reference RADIUS Dynamic Authorization Extension Commands
Usage Guide
The timeout time needs to be changed based on application requirements.
Configuration
Examples
#Set the timeout time for processing packets about RADIUS dynamic authorization extension to 40
seconds:
Ruijie(config)# radius dynamic-authorization-extension timeout 40
Related
Commands
Command Description
show running-config
Shows the configuration.
Platform
Description
N/A
radius dynamic-authorization-extension event-timestamp interval
Use this command to set the timeout time for the event-timestamp attribute of packets about
RADIUS dynamic authorization extension. Use the no form of this command to remove the setting.
radius dynamic-authorization-extension event-timestamp interval seconds
no radius dynamic-authorization-extension event-timestamp interval
Parameter
Description
Parameter Description
seconds
Specifies the timeout time for the event-timestamp attribute of
packets about RADIUS dynamic authorization extension, in seconds.
The value ranges from 0 to 600. The default value is 6. 0 indicates
that the timeout time for the event-timestamp attribute will not
expire.
Defaults
6
Command
mode
Global configuration mode
Usage Guide
The timeout time needs to be changed based on application requirements. It takes effect only after
the event-timestamp attribute check function is enabled.
Configuration
Examples
#Set the timeout time for the event-timestamp attribute of packets about RADIUS dynamic
authorization extension to 40 seconds:
Ruijie(config)# radius dynamic-authorization-extension event-timestamp
interval 40
Related
Commands
Command Description