Ruijie RG-WLAN Series

Command Reference CPU Protection Commands
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
The following example maps BPDU packets to queue 7.
Ruijie(config)# cpu-protect type bpdu pri 7
Set packet type bpdu pri 7.
Command Description
Related
Commands
cpu-protect type packet-type pps pps_value
Sets the bandwidth for transmitting
packets of a specified type.
Platform
Description
N/A
show cpu-protect type
Use this command to display statistics about the packets of a specified type.
show cpu-protect type { arp | bpdu | dhcp | ipv6mc | igmp | rip | ospf | vrrp | pim | ttl1 |
unknown-ipmc | dvmrp | …} dvmrp
Parameter Description Parameter
Description
slot_num
Value range: 1 to 16
Defaults
N/A
Command
Mode
Privileged user mode
Usage Guide
Use this command to display statistics about the packets of a specified type.
Configuration
Examples
The following example uses the show cpu-protect type bpdu command to display statistics of
receiving BPDU packets.
Ruijie(config)# show cpu-protect type arp
Slot Type Pps Total Drop
--------- ------------ --------- --------- ---------
MainBoard bpdu 100 30 0
Slot-2 bpdu 100 30 0
Command Description
Related
Command
show cpu-protect type packet-type
Displays statistics of packets of a specified
type protected by the CPU.