Ruijie RG-WLAN Series

Command Reference Spectral Analysis Commands
bth
Configures recognition accuracy of the Bluetooth headset within the
range from 1 to 4.
bts
Configures recognition accuracy of the Bluetooth voice within the
range from 1 to 2.
cph
Configures recognition accuracy of the cordless phone within the
range from 3 to 5.
mwo
Configures recognition accuracy of the microwave within the range
from 1 to 5.
cwa
Configures recognition accuracy of the continuous wave within the
range from 4 to 10.
Defaults
vbr: 5
bth: 1
bts: 1
cph: 5
mwo: 1
cwa: 8
Command
mode
AP configuration mode on the fit AP or AC
Or:
Spectral configuration mode on the fat AP
Usage Guide
N/A
Configuration
Examples
This example shows how to configure recognition accuracy of the SA video bridge on the specified
AP.
Ruijie(config-ap)# spectral stability vbr 2
This example shows how to restore recognition accuracy of the video bridge to the default value on
the specified AP.
Ruijie(config-ap)# no spectral stability vbr
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported on wireless AC products and several AP products, including AP220-SH
v1.0 v1.1, AP320－I, AP330－I, AP110-W, AP220－I v2.0, AP220-E v5.0.
spectral period num
Use this command to configure the AP scanning cycle.
[ no ] spectral period num
Parameter
Parameter Description