Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NFPP Commands
Description
per-src-ip
Set the attack threshold for each source IP address.
per-port
Set the attack threshold for each port.
pps
Set the attack threshold, in pps. The valid range is 1 to 9999.
Defaults
By default, the attack threshold for each source IP address and each port are 20pps and 2000pps
respectively.
Command
Mode
NFPP configuration mode.
Usage Guide
The attack threshold shall be equal to or larger than the rate-limit threshold.
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard attack-threshold per-src-ip 2
Ruijie(config-nfpp)# ip-guard attack-threshold per-port 50
Related
Commands
Command Description
nfpp ip-guard policy
Show the rate-limit threshold and attack
threshold.
show nfpp ip-guard summary
Show the configurations.
show nfpp ip-guard hosts
Show the monitored host list.
clear nfpp ip-guard hosts
Clear the monitored host.
Platform
Description
N/A
ip-guard enable
Use this command to enable the IP anti-scanfunction.
ip-guard enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
Enabled
Command
Mode
NFPP configuration mode.
Usage Guide
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English