Ruijie RG-WLAN Series Rgos Command Reference

Command Reference SNMP Commands
Platform
Description
N/A
snmp-server host
Use this command to specify the SNMP host (NMS) to send the trap message in global configuration
mode. Use the no form of this command to remove the specified SNMP host.
snmp-server host { host-addr | ipv6 ipv6-addr } [ vrf vrfname ] [ traps ] [ version { 1 | 2c | 3 { auth |
noauth | priv } ] community-string [ udp-port port-num ] [ notification-type ]
no snmp-server host { host-addr | ipv6 ipv6-addr } [ vrf vrfname ] [ traps ] [ version { 1 | 2c | 3
{ auth | noauth | priv } ] community-string [ udp-port port-num ]
Parameter
Description
Parameter Description
host-addr
SNMP host address
ipv6-addr
SNMP host address(ipv6)
vrfname
Sets the name of vrf forwarding table
Version
SNMP Version: V1, V2C or V3
auth | noauth | priv
Security level of SNMPv3 users
community-string
Community string or username (SNMPv3 Version)
port-num
Port of the SNMP host
notification-type
The type of the SNMP trap message sent actively, such as snmp.
Defaults
No SNMP host is specified by default.
If no type of the SNMP trap message is specified, all types of the SNMP trap message are included.
Command
mode
Global configuration mode
Usage Guide This command must work with the snmp-server enable traps command in global configuration
mode to actively send the SNMP trap messages to NMS.
You can configure multiple SNMP hosts to receive the SNMP Trap messages. One host can use
different combinations of the types of the SNMP trap message, different ports and different VRF
forwarding tables, but the last configuration for the same host (same port, same VRF configuration)
will overwrite the previous configurations. In other words, to send different SNMP trap messages to
the same host, different combination of SNMP trap messages have to be configured.
Configuration
Examples
The following example specifies an SNMP host to receive the SNMP event trap:
Ruijie(config)# snmp-server host 192.168.12.219 public snmp
Related
Commands
Command Description
snmp-server enable traps
Enables to send the SNMP trap message.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English