Ruijie RG-WLAN Series Rgos Command Reference

Command Reference DHCP Commands
when it assigns an IP address.
Platform
Description
N/A
ip dhcp ping timeout
Use this command to configure the timeout that the DHCP server waits for a response when it uses
the ping operation to detect the address conflict in global configuration mode. Use the no form of this
command to restore it to the default configuration.
ip dhcp ping timeout milli-seconds
no ip dhcp ping timeout
Parameter Description Parameter
Description
milli-seconds
Time that the DHCP server waits for ping response in
the range 100 to 10000 milliseconds.
Defaults
The timeout is 500 seconds by default.
Command
Mode
Global configuration mode
Usage Guide
This command defines the time that the DHCP server waits for a ping response packet.
Configuration
Examples
The following example configures that the waiting time of the ping response packet is 600ms.
Ruijie(config)# ip dhcp ping timeout 600
Command Description Related
Commands
clear ip dhcp conflict
Clears the DHCP history conflict record.
ip dhcp ping packets
Defines the number of the packets sent by the ping
operation for the detection of the address conflict
when the DHCP server assigns an IP address.
show ip dhcp conflict
Shows the address conflict the DHCP server detects
when it assigns an IP address.
Platform
Description
N/A
ip dhcp pool
Use this command to define a name of the DHCP address pool and enter DHCP address pool
configuration mode in global configuration mode. Use the no form of this command to delete the
DHCP address pool.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English