Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NTP Commands
server, the server should have the identical global encryption key and global trust key.
In the same condition (for instance, precision), the prefer clock is used for synchronization.
Note that the NTP-packet-sending source interface is configured with the IP address and can
communicate with the corresponding NTP server.
Configuration
Examples
The following example configures the network device as the NTP server.
IPv4 configuration: Ruijie(config)# ntp server 192.168.210.222
IPv6 configuration: Ruijie(config)# ntp server 10::2
Related
Commands
Command Description
no ntp
Disables the NTP service.
Platform
Description
This command is unavailable on some devices that do not support this function.
ntp synchronize
Use this command to perform real-time synchronization.
ntp synchronize
no ntp synchronize
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Global configuration mode
Usage Guide
Eight consecutive packets are synchronized for the first synchronization between the client and the
server. Follow-up NTP synchronization occurs automatically every one minute. To manually
implement real-time synchronization during the auto-synchronization interval, you can use this
command.
Configuration
Examples
The following example implement NTP real-time synchronization.
Ruijie(config)# ntp synchronize
Related
Commands
Command Description
ntp server
Specifies an NTP server and implements
synchronization.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English