Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WIDS Commands
Defaults
N/A
Command
mode
WIDS configuration mode
Usage Guide
N/A
Configuration
Examples
#Clear the entries of all whitelists.
Ruijie(config)# wids
Ruijie(config-wids)# reset whitelist all
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
sigmac { auth | deauth | assoc | diassoc } number number time time
Use this command to configure attack detection in which an attack is considered to have occurred if
the threshold for determining an attack using frames of the specified type is reached in the specified
detection duration for the same MAC address.
sigmac { uth | deauth | assoc | disassoc } number number time time
Parameter
Description
Parameter Description
auth
Threshold for determining an authentication frame attack during
attack detection for the same MAC address
Default value: 300
deauth
Threshold for determining a de-authentication frame attack during
attack detection for the same MAC address
Default value: 300
assoc
Threshold for determining an association frame attack during attack
detection for the same MAC address
Default value: 300
disassoc
Threshold for determining a de-association frame attack during attack
detection for the same MAC address
Default value: 300
time
Duration of attack detection
Default value: 10 seconds
Defaults
Attack detection disabled by default.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English