Ruijie RG-WLAN Series Rgos Command Reference

Command Reference 802.1X Commands
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Related
Commands
Command Description
show dot1x Shows the information about 802.1x.
Platform
Description
N/A
dot1x timeout tx-period
Use this command to set the interval of transmitting packets after the maximum number of
retransmission times is configured. Use the no form of the command to restore it to the default
setting.
dot1x timeout tx-period seconds
no dot1x timeout tx-period
Parameter
Description
Parameter Description
seconds
Authentication timeout between the device and the supplicant The
range is from 0 to 65535 seconds.
Defaults
3 seconds.
Command
Mode
Global configuration mode.
Usage Guide
Use the show dot1x command to show 802.1X configuration.
Configuration
Examples
The following example sets the interval of retransmission to 10s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout tx-period 10
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status: Enabled
Authentication mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Disabled
Re-authen Period: 1000 sec
Quiet Timer Period: 1000 sec
Tx Timer Period: 10 sec

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English