Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Web Authentication Commands
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# aaa authentication web-auth edu_authen group radius
Ruijie(config)# wlansec 100
Ruijie(wlansec)# web-auth authentication v2 edu_authen
Ruijie(wlansec)# exit
Related
Commands
Command Description
aaa authentication web-auth
Configures AAA authentication method list for
web authentication.
Platform
Description
This command is supported only on wireless products.
web-auth direct-host
Use this command to the set the scope of the IP addresses free from authentication. Use the no form
of this command to delete authentication-free IP addresses.
web-auth direct-host ipv6-address | { ip-address [ ip-mask ] [ port interface-name ] [ arp ] }
no web-auth direct-host ipv6-address | ip-address
Parameter
Description
Parameter Description
ip-address
The parameter indicates the address of an authentication-free IP
address.
ipv6-address
IPv6 address free from authentication.
ip-mask
(Optional) The parameter indicates the IP address mask of an
authentication-free user.
arp
(Optional) If the ARP CHECK functionality is enabled on the access
device, the IP address, including the VRRP address of the gateway
uplinked with terminal users must be configured as
authentication-free resource with the keyword arp. Other
authentication-free resources do not need to carry the keyword arp.
Defaults
By default, the authentication-free users are not set, that is, all IPs must pass the Web authentication
before accessing the restricted network resources.
Command
mode
Global configuration mode
Usage Guide
If you set an IP as authentication-free, the IP can access all reachable network resources without
undergoing the Web authentication.
Up to 100 authentication-free IPs are allowed.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English