Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WDS Commands
WDS Commands
data-plane wireless-broadcast
Use this command to configure broadcast packets to be forwarded from wired ports to wireless ports.
data-plane wireless-broadcast { enable | disable }
Parameter
Description
Parameter Description
N/A N/A
Defaults
This command is not configured by default.
Command
Mode
Global configuration mode
Usage Guide
Use this command when broadcast packets need to be forwarded from wired ports to wireless ports
in Wireless Distribution Systems (WDSs).
Configuration
Examples
#Configure to forward packets from wired ports to wireless ports.
Ruijie(config)# data-plane wireless-broadcast enable
Related
Commands
Command Description
station-role { access-point | non-root-bridge |
root-bridge }
Configures AP working modes.
Platform
Description
N/A
parent mac-address
Use this command to set the MAC address of the parent node.
parent mac-addrss HHHH.HHHH.HHHH
Parameter
Description
Parameter Description
HHHH.HHHH.HHHH
MAC address of the parent node to be configured.
Defaults
N/A
Command
Interface configuration mode

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English