Command Reference NFPP Commands
100 20 120
Ruijie#show nfpp ip-guard hosts
If column 1 shows '*', it means "hardware do not isolate host" .
VLAN interface IP address Reason remain-time(s)
---- -------- --------- ------- -------------
1 Gi0/1 1.1.1.1 ATTACK 110
2 Gi0/2 1.1.2.1 SCAN 61
Total:2 host(s)
Related
Commands
Command Description
clear nfpp ip-guard hosts
Clear the monitored host.
Platform
Description
N/A
show nfpp ip-guard summary
Use this command to show the configurations.
show nfpp ip-guard summary
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# show nfpp ip-guard summary
(Format of column Rate-limit and Attack-threshold is
per-src-ip/per-src-mac/per-port.)
Interface Status Isolate-period Rate-limit Attack-threshold Scan-threshold
Global Enable 300 4/-/60 8/-/100 15
Gi 0/1 Enable 180 5/-/- 8/-/- -
Gi 0/2 Disable 200 4/-/60 8/-/100 20
Maximum count of monitored hosts: 1000
Monitor period..300s
To Next Page
Loading...
