Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WLAN Capture Commands
Platform
Description
This command is supported only on the AC.
wlan-cap enable
Use this command to enable the WLAN capture service on the radio of the AP.
Use the no form of this command to disable the WLAN capture service on the radio of the AP.
wlan-cap enable radio-id
no wlan-cap enable radio-id
Parameter
Description
Parameter Description
radio-id
The parameter indicates the ID of the radio to be configured, which
ranges from 1 to 31.
Defaults
By default, this function is disabled.
Command
mode
AP configuration mode
Usage Guide
Configuration to a non-existent Radio is invalid.
This command is invalid in ap-config all mode.
Configuration
Examples
Example 1: Configure the online AP (1414.4b61.09c7) to capture packets on all channels of radio 1.
Ruijie# configure terminal
Ruijie(config)#ap-config 1414.4b61.09c7
You are going to config AP(1414.4b61.09c7), which is on line now.
Ruijie(config-ap)#wlan-cap enable 1
Ruijie(config-ap)#exit
Related
Commands
Command Description
show wlan-cap interfaces
Shows the WLAN capture interfaces list.
Platform
Description
This command is supported only on the AC.
show wlan-cap
Use these commands to show information about the WLAN capture service.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English