Ruijie RG-WLAN Series

Command Reference 802.1X Commands
dot1x timeout server-timeout
Use this command to set the authentication timeout between the device and the authentication
server. Use the no form of the command to restore it to the default setting.
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout
Parameter
Description
Parameter Description
seconds
Authentication timeout between the device and the authentication
server. The range is 0 to 65535 seconds.
Defaults
5 seconds.
Command
Mode
Global configuration mode.
Usage Guide
Use the show dot1x command to show 802.1X configuration.
Configuration
Examples
The following example sets the authentication timeout of the authentication server to 10s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout server-timeout 10
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status: Enabled
Authentication mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Disabled
Re-authen Period: 1000 sec
Quiet Timer Period: 1000 sec
Tx Timer Period: 3 sec
Supplicant Timeout: 3 sec
Server Timeout: 10 sec
Re-authen Max: 3 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Related
Commands
Command Description