Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WLAN-VLAN Mapping Commands
vlan-group
Use this command to create a VLAN group on an AP device. Use the no form of this command to
delete the configuration.
vlan-group group-id
no vlan-group group-id
Parameter Description
Parameter
Description
group-id
Specifies the ID of a VLAN group, which ranges from 1 to
128.
Defaults
None
Configuration
Mode
Global configuration mode
Usage Guide
None
Configuration
Examples
The following example shows how to create VLAN group 100 on an AP:
Ruijie# configure terminal
Ruijie(config)# vlan-group 100
Ruijie(config-vlan-group)#
Command Description
Related
Commands
show vlan-group [group-id]
Display information about a VLAN group.
Platform
Description
This command is supported by the RGOS10.4 (1T17) or later versions.
default-vlan
When the 802.1x-based VLAN assignment mode is configured on an AP device, the authentication
server is responsible for assigning VLANs to users. Use this command to enable the device to
assign the default VLAN after authentication. Use the no form of this command to delete the
configuration.
default-vlan vlan-id
no default-vlan
Parameter Description
Parameter
Description
vlan-id
Specifies a VLAN ID.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English