Ruijie RG-WLAN Series - WIDS Commands; Attack-Detection Enable

Command Reference WIDS Commands
WIDS Commands
attack-detection enable
Use this command to enable the IDS attack detection function. Use the no form of this command to
disable the IDS attack detection function.
attack-detection enable { all | flood | weak-iv | spoof }
no attack-detection enable { all | flood | weak-iv | spoof }
Parameter
Description
Parameter Description
all
The parameter indicates that you enable all types of IDS attack
detection function.
flood
The parameter indicates that you enable the Flooding IDS attack
detection function.
weak-iv
The parameter indicates that you enable the Weak-IV IDS attack
detection function.
spoof
The parameter indicates that you enable the Spoofing IDS attack
detection function.
no
The parameter indicates that you disable the IDS attack detection
function.
Defaults The default is no.
Command
mode
WIDS configuration mode.
Usage Guide
N/A
Configuration
Examples
#Enable the Weak-IV IDS attack detection function.
Ruijie(config)# wids
Ruijie(config-wids)# attack-detection enable weak-iv
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A