Ruijie RG-WLAN Series

Command Reference NFPP Commands
nfpp dhcpv6-guard policy
Show the rate-limit threshold and attack
threshold.
show nfpp dhcpv6-guard summary
Show the configurations.
show nfpp dhcpv6-guard hosts
Show the monitored host list.
clear nfpp dhcpv6-guard hosts
Clear the monitored host.
Platform
Description
N/A
dhcpv6-guard enable
Use this command to enable the DHCPv6 anti-attack function.
dhcpv6-guard enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
Disabled
Command
Mode
NFPP configuration mode.
Usage Guide
N/A
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# dhcpv6-guard enable
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
dhcpv6-guard isolate-period
Use this command to set the isolate time globally.
dhcpv6-guard isolate-period { seconds | permanent }
Parameter
Description
Parameter Description
seconds
Set the isolate time, in seconds. The valid range is 0, or 30 to 86400.