Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NFPP Commands
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard enable
Related
Commands
Command Description
nffp ip-guard enable
Enable the IP anti-scan function on the
interface.
Platform
Description
N/A
ip-guard isolate-period
Use this command to set the isolate time globally.
ip-guard isolate-period { seconds | permanent }
Parameter
Description
Parameter Description
seconds
Set the isolate time, in seconds. The valid range is 0, or 30 to 86400.
permanent
Permanent isolation.
Defaults
The default isolate time is 0, which means no isolation.
Command
Mode
NFPP configuration mode.
Usage Guide
N/A.
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard isolate-period 180
Related
Commands
Command Description
nfpp ip-guard isolate-period
Set the isolate time on the interface.
show nfpp ip-guard summary
Show the configurations.
Platform
Description
N/A
ip-guard monitor-period
Use this command to configure the monitor time.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English